Further accessories
For all manner of requirements
580 results:
- Description: Programming unit display for programmable SICK DFS60, DFV60, AFS/AFM60, AHS/AHM36 encoders, and wire draw encoder with DFS60, AFS/AFM60 and AHS/AHM36. Compact dimensions, low weight, and intuitive operation.
- Items supplied: 1 x PGT-10-Pro stand-alone programming tool,4 x alkaline type batteries, 1.5 V Mignon (AA)
Sensor Visualization
SLT
- Product category: LED signal lamp
- Further functions: IO-Link signal lamp, Parameterization via IO-Link, Simple configuration directly via the SOPAS ET user interface, the engineering tool from SICK
- Description: Programming tool for ATM60, ATM90, and KH53
- Items supplied: Power supply, interface, link cable, encoder cable, and software
- Description: USB programming unit, for programmable SICK encoders AFS60, AFM60, DFS60, VFS60, DFV60 and wire draw encoders with programmable encoders
- Description: SVip® LAN programming tool for all motor feedback systems
- Items supplied: 1x programming tool PGT-11-S LAN, 1x power supply unit 100-240 V AC / 12 V DC, primary adapter (Europe, UK, USA/Japan, Australia), Ethernet cable 3 m
- Description: Alignment aid for detecting the infrared light (wavelength 780 nm to 1050 nm) of SICK sensors
- Items supplied: Alignment aid, pedestal, display aid, mounting instructions
- Description: Hand-held programming device for the programmable SICK AHS/AHM36 CANopen encoders, TMS/TMM61 CANopen inclination sensors, TMS/TMM88 CANopen, TMS/TMM88 Analog, and wire draw encoders with AHS/AHM36 CANopen. Compact dimensions, low weight, and intuitive operation.
- Items supplied: 1 x PGT-12-Pro standalone programming tool, 4 x 1.5 V (AA) alkaline mignon batteries
Measuring wheel encoders
DFV60
- Measuring wheel circumference: 300 mm
- Measuring wheel surface: O-ring NBR70
- Communication interface: 10 V ... 32 V, Incremental, HTL, Push pull
- Supply voltage: 10 V ... 32 V
- Connection type: Cable, 8-wire, universal, 1.5 m
- Resolution in pulses/mm: 3.41
Measuring wheel encoders
DFV60
- Measuring wheel circumference: 300 mm
- Measuring wheel surface: O-ring NBR70
- Communication interface: 10 V ... 32 V, Incremental, HTL, Push pull
- Supply voltage: 10 V ... 32 V
- Connection type: Male connector, M12, 8-pin, radial
- Resolution in pulses/mm: 3.41
- Description: Rigid actuator, can be inserted into the locking device from the front or side
- Description: Muting arm for active unit with mounted muting sensors with cable
- Description: Cable cover for muting arms, 4 pieces, length 400 mm, suitable for 2111923 and 2111924
- Description: Spare part set optics cover with replacement seal and screws
- Description: PC programming unit for programmable SPEETEC 1D. Connects the configuration connection of SPEETEC 1D programmable sensors to a PC / laptop, enabling parameterization and diagnostics via SOPAS ET. The interface is not designed as a permanent connection. The cable of the programming device must not be extended.
- Items supplied: 1x PC PGT-14 programming unit
- Description: nanoScan3 optics cover spare part set with seal and screws
- Description: Suitable for protective field height of 1,200 mm
- Description: HighLine wire draw mechanism for servo flange with 6 mm shaft, measuring range 0 m ... 15 m
- Items supplied: Without encoder
- Accessory family: Other adapters
- Description: The M12 5-pin pushbutton makes it possible to switch the laser alignment aid integrated in the deTec4 sender on and off.