Contact
Feedback

LFP Cubic

Flexible up to the probe tip

  • At a glance
    • Level sensor for liquids
    • No mechanical moving parts
    • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm)
    • Resistant to deposit formation
    • Process temperature up to 100 °C,process pressure up to 10 bar
    • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output
    • High enclosure rating of IP 67, rotatable housing and remote amplifier
    • IO-Link 1.1
    Your Benefits
    • Rugged design increases service life
    • High flexibility with interchangeable rod probe or cable probe that can be cut to length
    • Cost savings due to multiple output signals: One system for both point level and continuous level measurement
    • Maintenance-free and easy to commission without calibration, saving time and money
    • Titanium process connection is highly resistant to chemicals
    • Compact, rotatable housing and remote amplifier for flexible installation
    • High availability, even when several sensors are installed in parallel, since there is no mutual device interference
    • Universal technology facilitating calibration-free measurement saves time and money
    LFP Cubic
    Flexible up to the probe tip

    The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use.

    • Technical data overview
      Measurement principleTDR sensor
      Detection principleContact
      MediumFluids
      MeasurementSwitch, Continuous
      Process temperature–20 °C ... +100 °C
      Process pressure–1 bar ... 10 bar
      Output signal1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V / 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
Please select your products
Show all Hide all
Filter by:

148 results:

Result 1 - 24 out of 148

1062245
LFP Cubic
Level sensors
  • Process connection: G ¾ A
  • Probe length: 200 mm
  • Probe type: Rod probe
  • Application type/design: Standard
  • Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
  • Electrical connection: M12 round connector x 1, 8-pin
  • Process temperature: –20 °C ... +100 °C
  • Wetted parts: 1.4404, PTFE
  • Details
  • Compare now
1062246
LFP Cubic
Level sensors
  • Process connection: G ¾ A
  • Probe length: 300 mm
  • Probe type: Rod probe
  • Application type/design: Standard
  • Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
  • Electrical connection: M12 round connector x 1, 8-pin
  • Process temperature: –20 °C ... +100 °C
  • Wetted parts: 1.4404, PTFE
  • Details
  • Compare now
1062247
LFP Cubic
Level sensors
  • Process connection: G ¾ A
  • Probe length: 400 mm
  • Probe type: Rod probe
  • Application type/design: Standard
  • Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
  • Electrical connection: M12 round connector x 1, 8-pin
  • Process temperature: –20 °C ... +100 °C
  • Wetted parts: 1.4404, PTFE
  • Details
  • Compare now
1062248
LFP Cubic
Level sensors
  • Process connection: G ¾ A
  • Probe length: 500 mm
  • Probe type: Rod probe
  • Application type/design: Standard
  • Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
  • Electrical connection: M12 round connector x 1, 8-pin
  • Process temperature: –20 °C ... +100 °C
  • Wetted parts: 1.4404, PTFE
  • Details
  • Compare now
1062250
LFP Cubic
Level sensors
  • Process connection: G ¾ A
  • Probe length: 700 mm
  • Probe type: Rod probe
  • Application type/design: Standard
  • Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
  • Electrical connection: M12 round connector x 1, 8-pin
  • Process temperature: –20 °C ... +100 °C
  • Wetted parts: 1.4404, PTFE
  • Details
  • Compare now
1062251
LFP Cubic
Level sensors
  • Process connection: G ¾ A
  • Probe length: 800 mm
  • Probe type: Rod probe
  • Application type/design: Standard
  • Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
  • Electrical connection: M12 round connector x 1, 8-pin
  • Process temperature: –20 °C ... +100 °C
  • Wetted parts: 1.4404, PTFE
  • Details
  • Compare now
1062249
LFP Cubic
Level sensors
  • Process connection: G ¾ A
  • Probe length: 600 mm
  • Probe type: Rod probe
  • Application type/design: Standard
  • Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
  • Electrical connection: M12 round connector x 1, 8-pin
  • Process temperature: –20 °C ... +100 °C
  • Wetted parts: 1.4404, PTFE
  • Details
  • Compare now
1062252
LFP Cubic
Level sensors
  • Process connection: G ¾ A
  • Probe length: 900 mm
  • Probe type: Rod probe
  • Application type/design: Standard
  • Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
  • Electrical connection: M12 round connector x 1, 8-pin
  • Process temperature: –20 °C ... +100 °C
  • Wetted parts: 1.4404, PTFE
  • Details
  • Compare now
1062253
LFP Cubic
Level sensors
  • Process connection: G ¾ A
  • Probe length: 1,000 mm
  • Probe type: Rod probe
  • Application type/design: Standard
  • Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
  • Electrical connection: M12 round connector x 1, 8-pin
  • Process temperature: –20 °C ... +100 °C
  • Wetted parts: 1.4404, PTFE
  • Details
  • Compare now
1062258
LFP Cubic
Level sensors
  • Process connection: G ¾ A
  • Probe length: 1,500 mm
  • Probe type: Rod probe
  • Application type/design: Standard
  • Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
  • Electrical connection: M12 round connector x 1, 8-pin
  • Process temperature: –20 °C ... +100 °C
  • Wetted parts: 1.4404, PTFE
  • Details
  • Compare now
1057092
LFP Cubic
Level sensors
  • Process connection: ¾ NPT
  • Probe length: 200 mm
  • Probe type: Rod probe
  • Application type/design: Standard
  • Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
  • Electrical connection: Round connector M12 x 1, 5-pin
  • Process temperature: –20 °C ... +100 °C
  • Wetted parts: 1.4404, PTFE
  • Details
  • Compare now
1057093
LFP Cubic
Level sensors
  • Process connection: ¾ NPT
  • Probe length: 300 mm
  • Probe type: Rod probe
  • Application type/design: Standard
  • Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
  • Electrical connection: Round connector M12 x 1, 5-pin
  • Process temperature: –20 °C ... +100 °C
  • Wetted parts: 1.4404, PTFE
  • Details
  • Compare now
1057094
LFP Cubic
Level sensors
  • Process connection: ¾ NPT
  • Probe length: 400 mm
  • Probe type: Rod probe
  • Application type/design: Standard
  • Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
  • Electrical connection: Round connector M12 x 1, 5-pin
  • Process temperature: –20 °C ... +100 °C
  • Wetted parts: 1.4404, PTFE
  • Details
  • Compare now
1057095
LFP Cubic
Level sensors
  • Process connection: ¾ NPT
  • Probe length: 500 mm
  • Probe type: Rod probe
  • Application type/design: Standard
  • Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
  • Electrical connection: Round connector M12 x 1, 5-pin
  • Process temperature: –20 °C ... +100 °C
  • Wetted parts: 1.4404, PTFE
  • Details
  • Compare now
1062263
LFP Cubic
Level sensors
  • Process connection: G ¾ A
  • Probe length: 2,000 mm
  • Probe type: Rod probe
  • Application type/design: Standard
  • Output signal: 1 x PNP + 3 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
  • Electrical connection: M12 round connector x 1, 8-pin
  • Process temperature: –20 °C ... +100 °C
  • Wetted parts: 1.4404, PTFE
  • Details
  • Compare now
1057096
LFP Cubic
Level sensors
  • Process connection: ¾ NPT
  • Probe length: 600 mm
  • Probe type: Rod probe
  • Application type/design: Standard
  • Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
  • Electrical connection: Round connector M12 x 1, 5-pin
  • Process temperature: –20 °C ... +100 °C
  • Wetted parts: 1.4404, PTFE
  • Details
  • Compare now
1057099
LFP Cubic
Level sensors
  • Process connection: ¾ NPT
  • Probe length: 900 mm
  • Probe type: Rod probe
  • Application type/design: Standard
  • Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
  • Electrical connection: Round connector M12 x 1, 5-pin
  • Process temperature: –20 °C ... +100 °C
  • Wetted parts: 1.4404, PTFE
  • Details
  • Compare now
1057097
LFP Cubic
Level sensors
  • Process connection: ¾ NPT
  • Probe length: 700 mm
  • Probe type: Rod probe
  • Application type/design: Standard
  • Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
  • Electrical connection: Round connector M12 x 1, 5-pin
  • Process temperature: –20 °C ... +100 °C
  • Wetted parts: 1.4404, PTFE
  • Details
  • Compare now
1057098
LFP Cubic
Level sensors
  • Process connection: ¾ NPT
  • Probe length: 800 mm
  • Probe type: Rod probe
  • Application type/design: Standard
  • Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
  • Electrical connection: Round connector M12 x 1, 5-pin
  • Process temperature: –20 °C ... +100 °C
  • Wetted parts: 1.4404, PTFE
  • Details
  • Compare now
1057100
LFP Cubic
Level sensors
  • Process connection: ¾ NPT
  • Probe length: 1,000 mm
  • Probe type: Rod probe
  • Application type/design: Standard
  • Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
  • Electrical connection: Round connector M12 x 1, 5-pin
  • Process temperature: –20 °C ... +100 °C
  • Wetted parts: 1.4404, PTFE
  • Details
  • Compare now
1057110
LFP Cubic
Level sensors
  • Process connection: ¾ NPT
  • Probe length: 2,000 mm
  • Probe type: Rod probe
  • Application type/design: Standard
  • Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
  • Electrical connection: Round connector M12 x 1, 5-pin
  • Process temperature: –20 °C ... +100 °C
  • Wetted parts: 1.4404, PTFE
  • Details
  • Compare now
1060171
LFP Cubic
Level sensors
  • Process connection: G ¾ A
  • Probe length: 25 mm
  • Probe type: Without probe
  • Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
  • Electrical connection: Round connector M12 x 1, 5-pin
  • Process temperature: –20 °C ... +100 °C
  • Wetted parts: 1.4404, PTFE
  • Details
  • Compare now
1060172
LFP Cubic
Level sensors
  • Process connection: ¾ NPT
  • Probe type: Without probe
  • Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
  • Electrical connection: Round connector M12 x 1, 5-pin
  • Process temperature: –20 °C ... +100 °C
  • Wetted parts: 1.4404, PTFE
  • Details
  • Compare now
1057073
LFP Cubic
Level sensors
  • Process connection: G ¾ A
  • Probe length: 200 mm
  • Probe type: Rod probe
  • Application type/design: Standard
  • Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
  • Electrical connection: Round connector M12 x 1, 5-pin
  • Process temperature: –20 °C ... +100 °C
  • Wetted parts: 1.4404, PTFE
  • Details
  • Compare now

Result 1 - 24 out of 148

TOP