Contact
Feedback

FLG

Installation and commissioning that couldn't be easier with very high levels of performance
  • At a glance
    • Dynamic or static operating mode, switchable
    • Forked- or frame-shaped housing, easy alignment
    • Adjustable sensitivity
    • Adjustable pushbutton lock
    • Rugged metal housing
    • Adjustable pulse lengthening
    • Can be switched between Q and Qnot outputs
    • Very fast response time
    Your Benefits
    • Simple installation and alignment, as sender and receiver in one housing
    • The adjustable pushbutton lock protects against unwanted changes to parameters and manipulation during operation
    • Due to pulse stretching, the output signal is available longer on the control system
    • Also available as an open version for simple integration into your application environment
    • Large monitored area, therefore only one device required for monitoring small and large parts
    • Using the sensitivity adjustment, it is possible to hide falling chips and only recognize objects that are relevant to your detection
    FLG
    Installation and commissioning that couldn't be easier with very high levels of performance

    The FLG (frame light grid) switching automation light grid is the innovative solution in which the sender and receiver are combined in one housing for the detection of small parts. The complicated individual adjustment of sender and receiver is now longer necessary. In dynamic operating mode, the FLG performs reject and removal control of workpieces in pressing and punching machines and also supports the packaging process. In static operating mode, it can be used for monitoring thread breakage. With a monitored area of 200 mm x 250 mm or 200 mm x 120 mm, it allows detection of small parts down to minimum dimensions of 2 mm over a large area.

    • Technical data overview
      Beam separation2 mm / 4 mm
      Minimum detectable object (MDO)Dynamic: 2 mm or 4 mm, static: 6 mm 1)
      Switching output1 x PNP, 1 x NPN
      Connection typeMale connector M12, 4-pin
      • 1) 2 mm MDO in limited detection area.
Please select your products
Show all Hide all
Filter by:

12 results:

Result 1 - 12 out of 12

6049334
FLG
Switching automation light grids
  • Version: Close
  • Beam separation: 2mm
  • Detection area (W x H): 120 mm x 200 mm (2 mm MDO in limited detection area)
  • Details
  • Compare now
6049333
FLG
Switching automation light grids
  • Version: Close
  • Beam separation: 2mm
  • Detection area (W x H): 180 mm x 200 mm (2 mm MDO in limited detection area)
  • Details
  • Compare now
6049138
FLG
Switching automation light grids
  • Version: Close
  • Beam separation: 2mm
  • Detection area (W x H): 250 mm x 200 mm (2 mm MDO in limited detection area)
  • Details
  • Compare now
6049135
FLG
Switching automation light grids
  • Version: Close
  • Beam separation: 4mm
  • Detection area (W x H): 120 mm x 200 mm
  • Details
  • Compare now
6049136
FLG
Switching automation light grids
  • Version: Close
  • Beam separation: 4mm
  • Detection area (W x H): 180 mm x 200 mm
  • Details
  • Compare now
6049137
FLG
Switching automation light grids
  • Version: Close
  • Beam separation: 4mm
  • Detection area (W x H): 250 mm x 200 mm
  • Details
  • Compare now
6050069
FLG
Switching automation light grids
  • Version: Open
  • Beam separation: 4mm
  • Detection area (W x H): 250 mm x 200 mm
  • Details
  • Compare now
6050064
FLG
Switching automation light grids
  • Version: Open
  • Beam separation: 2mm
  • Detection area (W x H): 120 mm x 200 mm (2 mm MDO in limited detection area)
  • Details
  • Compare now
6050065
FLG
Switching automation light grids
  • Version: Open
  • Beam separation: 2mm
  • Detection area (W x H): 180 mm x 200 mm (2 mm MDO in limited detection area)
  • Details
  • Compare now
6050066
FLG
Switching automation light grids
  • Version: Open
  • Beam separation: 2mm
  • Detection area (W x H): 250 mm x 200 mm (2 mm MDO in limited detection area)
  • Details
  • Compare now
6050067
FLG
Switching automation light grids
  • Version: Open
  • Beam separation: 4mm
  • Detection area (W x H): 120 mm x 200 mm
  • Details
  • Compare now
6050068
FLG
Switching automation light grids
  • Version: Open
  • Beam separation: 4mm
  • Detection area (W x H): 180 mm x 200 mm
  • Details
  • Compare now

Result 1 - 12 out of 12

TOP