Process measurement at flue gas scrubber inlets

Flue gas scrubbers reduce HCl and SO2. Wet scrubbers spray a cleaning solution into the scrubbing tower, counter-current to the gas. In the case of the dry scrubbing process, lime powder or milk of lime is used. In order to then remove any heavy metals and organic pollutants, activated carbon is added during dry absorption. The MCS300P HW simultaneously measures the SO2, HCl, H2O, and optionally the O2 components. These measurements can help to significantly reduce the consumption of reagents, thereby lowering operating costs. Peaks in concentration can also be quickly and reliably recorded.

  • Following product families can be used
    • Measurement of up to 10 IR components plus O2 and TOC
    • Hot/wet extractive measurement technology
    • Wear-free gas distribution through ejector pumps
    • Reference point monitoring with internal calibration cells
    • Certified digital Modbus® interface
    • Web server for platform-independent device control
    • Use of dry test gases for HCl and NH3
    • Simultaneous measurement of up to 6 components plus O2
    • Measurement gas flow monitoring and measurement gas pressure detection
    • Temperature of the system components up to 200 °C
    • Automated sample point switching for up to 3 sample points (optional)
    • Automated adjustment to the zero and reference point
    • Integrated adjustment of the device without test gas (optional)
    • Extended operation via PC and SOPAS ET software
    • Flexible I/O module system