Emissions monitoring of all pollutant components in ammunition disposal

With the MCS200HW, the following components are continuously recorded: HCl, CO, Nox(sumx(sum of NO and NO2), SO2, O2, H2O, and Cges. Optionally, NH3 can also be measured with the multi-component analyzer system MCS200HW. With its integrated calibration filter, drift control of the analyzer system can be performed in accordance with the QAL3 standard without using a test gas. This makes the device significantly easier to use, and leads to a reduction in device maintenance costs as there is no need for calibration gases. The MERCEM300Z extractive gas analyzer can also be used to measure the mercury content.

  • Following product families can be used
    • Measurement of up to 10 IR components plus O2 and TOC
    • Hot/wet extractive measurement technology
    • Wear-free gas distribution through ejector pumps
    • Reference point monitoring with internal calibration cells
    • Certified digital Modbus® interface
    • Web server for platform-independent device control
    • Use of dry test gases for HCl and NH3
    • Accurate measurement of “total mercury” directly in a thermal converter (patented)
    • Measuring operation without reagents
    • Practically maintenance-free gas sampling using an ejector pump – no moving parts
    • Integrated adjustment cell for automated drift checking
    • Automated adjustment of the entire measuring system with a built-in test gas generator (optional)
    • Completely modular system design