Production logistics get smart
Closing the circle - Sensor solutions in production logistics - even for the smallest spaces in production
Two-dimensional collision avoidance on AGV system by 2D LiDAR sensors
Countless device variants of the TiM1xx and TiM3xx 2D LiDAR product families with scanning ranges of 3Â m to 10Â m are used for two-dimensional object detection. Thanks to their small sizes, they even fit where space is limited. A quasi three-dimensional detection is possible due to the slanted configuration of the switching field.
-
Following products can be used
2D LiDAR sensorsTiM- Integrated application: Field evaluation with flexible fields
- Measurement principle: HDDM+
- Working range: 0.05 m ... 10 m
- Angular resolution: 1°
- Number of field sets: 16
- Enclosure rating: IP67
- Digital outputs: 3 (PNP, additional 1 x “Device Ready”)
- Connection type: 1 x “Ethernet” connection, 4-pin M12 female connector, 1 x connection “Power”, 12-pin, M12 male connector, 1 x Micro USB female connector, type B
2D LiDAR sensorsTiM- Integrated application: Field evaluation with flexible fields
- Measurement principle: HDDM+
- Working range: 0.05 m ... 10 m
- Angular resolution: 1°
- Number of field sets: 16
- Enclosure rating: IP67
- Digital outputs: 3 (NPN, additional 1 x “Device Ready”)
- Connection type: 1 x “Ethernet” connection, 4-pin M12 female connector, 1 x connection “Power”, 12-pin, M12 male connector, 1 x Micro USB female connector, type B
2D LiDAR sensorsTiM- Integrated application: Output of measurement data
- Measurement principle: HDDM+
- Working range: 0.05 m ... 10 m
- Angular resolution: 1°
- Enclosure rating: IP67
- Digital outputs: 1 (PNP, SYNC/device ready)
- Connection type: 1 x “Ethernet” connection, 4-pin M12 female connector, 1 x connection “Power/Synchronization output” 5-pin, M12 male connector, 1 x Micro USB female connector, type B
