For improved monitoring of air pressure, the PAC50 electronic pressure switch from SICK offers more at a glance – the large bi-color display allows you to identify from a distance if the pressure falls within the target range. Three large function keys and intuitive menu navigation make operating the PAC50 easy.
What makes the PAC50 so special? It offers up to two digital switching outputs and an optional analog output in just one device. The output signals can be easily adjusted to the available control system. Thanks to the optional IO-Link, the controller or PLC can quickly and accurately pass the device parameters to the sensor when changing the format or replacing the sensor, which significantly reduces downtime. The PAC50 is ideal for use in industrial environments due to its waterproof housing with an IP 65/IP 67 enclosure rating.
At a glance
Large display shows system pressure, output states, and switching points
Three large function keys, intuitive menu navigation
Measuring range for gauge pressure (vacuum and overpressure)
Two independently programmable switching outputs, optional analog output
Installation on mounting rail, wall or switch panel
Variant for leakage monitoring
EVERYTHING FROM A SINGLE SOURCE! THE RIGHT SENSOR FOR EVERY APPLICATION.
Order your sensors now at particularly favourable special prices in the My SICK web shop! Simply log in or register online on My SICK – and you can order the selected sensors at particularly favorable special prices in the My SICK web shop.
Strikingly visible: The PAC50 shines in pneumatics
Optimal monitoring of relevant process parameters is essential for increasing the efficiency of pneumatic processes and conserving resources. That’s why SICK offers a wide range of electronic pressure transmitters and pressure switches.
The PAC50 electronic pressure switch is designed for pneumatic applications. Thanks to its three large function buttons and large display, it is easy to use. Processes are very easy to read on the display: The colors of the digits change when the set switching points are reached. This means the respective output state can be recognized even from a distance. The PAC50 can be used flexibly thanks to its measuring ranges for positive and negative pressures. The pressure switch is also produced free of paint wetting impairment substances (PWIS-free). The PAC50 has a dust- and waterproof housing. In addition, the optional IO-Link interface ensures good networking. – Impressive advantages.
Why the PAC50 offers more at first glance
With its positive and negative pressure ranges, the PAC50 is suitable for many different applications: It monitors the compressed air supply of systems, measures the system pressure in pneumatic controls or determines the suction pressure in vacuum grippers.
Leak measurement made easy
In factory automation, compressed air is among the most expensive forms of energy. To save costs, you must ensure that leaks in compressed air systems are detected as quickly as possible.
The PAC50-FGG (Leakage Tester) variant provides a cost-effective solution for detecting leak in compressed air systems. Basically, the sensor monitors the pressure drop over a preset period of time. The pressure switch enables a high degree of automation while doing so: The measurements can be started either automatically via a PLC or manually. The PAC50-FGG controls a valve via the output signal, puts the system in a locked state, and shows on the display the pressure drop, the period of measurement and – if the volume of the measured system is known – also a leakage rate in L/min. Depending on the presetting of the pressure switch, a signal regarding the measured time period or the pressure difference can be output via the analog output. At the same time, the sensor also retains its function as a simple pneumatic pressure switch.